Clarke PSE2A Handbuch für Betrieb und Wartung - Seite 8
Blättern Sie online oder laden Sie pdf Handbuch für Betrieb und Wartung für Water Pump Clarke PSE2A herunter. Clarke PSE2A 11 Seiten. Clean water pump
Seite drucken
PREPARATION
CONNECTING THE MULTI HOSE ADAPTOR
DISCONNECTED THE PUMP FROM THE MAINS POWER SUPPLY BEFORE
CONNECTING THE MULTI HOSE ADAPTOR
An Elbow is provided with a 1-1/4"BSP thread at
either end as shown in the diagram opposite.
Ensure the end fitted with an O-Ring is screwed
into the pump.
Screwed on to the other end of the elbow, is a
multi hose connector capable of accepting 1",
3/4" or 1/2" hoses. Simply cut the multi hose
connector to the required size and attach a
suitable hose using with a worm drive clip.
For maximum efficiency, we strongly
recommend that you connect a 1" diameter hose to the multi hose adapter,
Alternatively, you may remove the multi adapter altogether, and screw on a 1-1/4"
BSP hose adapter
The pump is completely submersible, and should be placed in a vertical position, on a
solid flat surface, Placing the pump on a couple of house bricks if required.
SUITABLE HOSES, and SPARE/REPLACEMENT MULTI HOSE ADAPTERS ARE
AVAILABLE FROM YOUR CLARKE DEALER
WARNING!
Multi Hose
Connector
Elbow
8