Clarke PSE2A 운영 및 유지보수 지침 매뉴얼 - 페이지 8

{카테고리_이름} Clarke PSE2A에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke PSE2A 11 페이지. Clean water pump

PREPARATION

CONNECTING THE MULTI HOSE ADAPTOR

DISCONNECTED THE PUMP FROM THE MAINS POWER SUPPLY BEFORE

CONNECTING THE MULTI HOSE ADAPTOR

An Elbow is provided with a 1-1/4"BSP thread at

either end as shown in the diagram opposite.

Ensure the end fitted with an O-Ring is screwed

into the pump.

Screwed on to the other end of the elbow, is a

multi hose connector capable of accepting 1",

3/4" or 1/2" hoses. Simply cut the multi hose

connector to the required size and attach a

suitable hose using with a worm drive clip.

For maximum efficiency, we strongly

recommend that you connect a 1" diameter hose to the multi hose adapter,

Alternatively, you may remove the multi adapter altogether, and screw on a 1-1/4"

BSP hose adapter

The pump is completely submersible, and should be placed in a vertical position, on a

solid flat surface, Placing the pump on a couple of house bricks if required.

SUITABLE HOSES, and SPARE/REPLACEMENT MULTI HOSE ADAPTERS ARE

AVAILABLE FROM YOUR CLARKE DEALER

WARNING!

Multi Hose

Connector

Elbow