Clarke 6925500 Handbuch für Betrieb und Wartung - Seite 11
Blättern Sie online oder laden Sie pdf Handbuch für Betrieb und Wartung für Heizgerät Clarke 6925500 herunter. Clarke 6925500 17 Seiten. Infrared diesel heater
Seite drucken
Any equipment or workshop furniture should be a safe distance away as they
could be adversely affected by heat.
VENTILATION
The heater must only be installed in a room which is well ventilated. Ventilation
is essential to reduce the dangers of carbon monoxide poisoning.
OPERATION
HEATER START UP
1. Plug the heater into the mains
power supply.
2. Set the power switch to the ON
position.
• The 'power-on' LED will
illuminate and the digital
temperature display will show
the room temperature for up to
3 minutes.
• Turn the temperature control
knob to adjust the target temperature required. This setting will be
shown by the digital display.
NOTE: If the heater does not start up, the temperature control may be set too
low. Turn the control knob to a higher setting until the heater starts. If
the heater does not start, switch the power switch off, then switch back
on again. If the heater still does not start, refer to fault-finding guide on
page 13. Also check that the power supply is correct.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
11