Clarke PS560 Betriebs- und Sicherheitsanweisungen - Seite 3
Blättern Sie online oder laden Sie pdf Betriebs- und Sicherheitsanweisungen für Werkzeuge Clarke PS560 herunter. Clarke PS560 13 Seiten. Heating torch sets
Auch für Clarke PS560: Betriebs-/Sicherheitshandbuch (8 seiten)
Seite drucken
ASSEMBLY
NOTE: A bottle of propane gas is required for use with this equipment,
capable of delivering a pressure of 4 bar. (A regulator is provided)
The bottle used must be of sufficient size to meet the needs of the
torch and appropriate sizes are listed on page 5.
NOTE: Always keep the bottle upright, enabling the propane to exit the
bottle as a gas without any tendancy to freeze. This may also
occur if the bottle used is too small.
1. Turn the knob on the regulator fully clockwise, then attach the regulator to
the gas bottle, ensuring it is tight.
2. Attach the hose supplied to the regulator at one end and the torch at the
other, noting that the hose connections have LEFT HAND THREADS, i.e. turn
them anticlockwise. Do not overtighten.
3. Attach the appropriate nozzle/burner to the torch where necessary.
4. If a nozzle/burner is already attached, remove it carefully, complete with
adapter (see illustration below). Unscrew the nozzle from the adapter and
replace with that of the desired type or size. Screw the adapter with the
nozzle back onto the torch.
NOTE: Model PKP411 requires the torch extension to be attached to the
torch.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
3