- ページ 3

ツール Clarke PS560のPDF 操作と安全に関する指示をオンラインで閲覧またはダウンロードできます。Clarke PS560 13 ページ。 Heating torch sets
Clarke PS560 にも：取扱説明書 (8 ページ)

ASSEMBLY

NOTE: A bottle of propane gas is required for use with this equipment,

capable of delivering a pressure of 4 bar. (A regulator is provided)

The bottle used must be of sufficient size to meet the needs of the

torch and appropriate sizes are listed on page 5.

NOTE: Always keep the bottle upright, enabling the propane to exit the

bottle as a gas without any tendancy to freeze. This may also

occur if the bottle used is too small.

1. Turn the knob on the regulator fully clockwise, then attach the regulator to

the gas bottle, ensuring it is tight.

2. Attach the hose supplied to the regulator at one end and the torch at the

other, noting that the hose connections have LEFT HAND THREADS, i.e. turn

them anticlockwise. Do not overtighten.

3. Attach the appropriate nozzle/burner to the torch where necessary.

4. If a nozzle/burner is already attached, remove it carefully, complete with

adapter (see illustration below). Unscrew the nozzle from the adapter and

replace with that of the desired type or size. Screw the adapter with the

nozzle back onto the torch.

NOTE: Model PKP411 requires the torch extension to be attached to the

torch.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]