CLAS OM 9203 Handbuch - Seite 14
Blättern Sie online oder laden Sie pdf Handbuch für Elektrowerkzeug CLAS OM 9203 herunter. CLAS OM 9203 20 Seiten. Coffret extracteur injecteurs fiat, coffret extracteur injecteurs fiat
OM 9203
INJECTOR EXTRACTOR SET FIAT
DANGER
Never release the internal hydraulic pressure
-
by loosening the handle!
Never release the internal hydraulic pressure
-
by loosening the air release screw!
-
Never screw clockwise the pusher in case of
grease leakage from the handle.
MAINTENANCE
Mechadraulic cylinders do not require any
particular maintenance; however, users should
consider the following aspects to increase their
service life:
• In case of replacement or topping up, always
use grease compliant with the characteristics
indicated in table A;
• Cylinders should be kept in dry and not dusty
places to increase their service life in case they
are not used;
• Store cylinders with the rod completely set
back to avoid external chemical agent attacks
which might damage smoothness and seal;
• Before and after any use, always check if grease
leakage occurs;
• If internal rings are replaced, the cylinder
should be repaired only by qualified and
experienced personnel.
Cylinder bleeding (rif. B)
•Place the cylinder so that the piston goes
downwards and the handle is lower than the air
release screw.
• Screw the screw pusher and slightly loosen the
air release; screw tight the air release screw as
soon as grease starts coming out.
• Always keep clean the pusher screw to avoid
traces of metal particles.
• Operation should be flowing and fluid,
therefore verify that the screw thread has not
been damaged.
A
Ø
11
(4x)
Ø (4x)
7
68
B