CLAS OM 9203 Manual - Página 14

Procurar online ou descarregar pdf Manual para Ferramenta eléctrica CLAS OM 9203. CLAS OM 9203 20 páginas. Coffret extracteur injecteurs fiat, coffret extracteur injecteurs fiat

Imprimir página

OM 9203

INJECTOR EXTRACTOR SET FIAT

DANGER

Never release the internal hydraulic pressure

by loosening the handle!

Never release the internal hydraulic pressure

by loosening the air release screw!

Never screw clockwise the pusher in case of

grease leakage from the handle.

MAINTENANCE

Mechadraulic cylinders do not require any

particular maintenance; however, users should

consider the following aspects to increase their

service life:

• In case of replacement or topping up, always

use grease compliant with the characteristics

indicated in table A;

• Cylinders should be kept in dry and not dusty

places to increase their service life in case they

are not used;

• Store cylinders with the rod completely set

back to avoid external chemical agent attacks

which might damage smoothness and seal;

• Before and after any use, always check if grease

leakage occurs;

• If internal rings are replaced, the cylinder

should be repaired only by qualified and

experienced personnel.

Cylinder bleeding (rif. B)

•Place the cylinder so that the piston goes

downwards and the handle is lower than the air

release screw.

• Screw the screw pusher and slightly loosen the

air release; screw tight the air release screw as

soon as grease starts coming out.

• Always keep clean the pusher screw to avoid

traces of metal particles.

• Operation should be flowing and fluid,

therefore verify that the screw thread has not

been damaged.

(4x)

Ø (4x)