Lenovo RackSwitch G8272 Schnellstart-Handbuch - Seite 14
Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Schalter Lenovo RackSwitch G8272 herunter. Lenovo RackSwitch G8272 24 Seiten.
Auch für Lenovo RackSwitch G8272: Produkthandbuch (32 seiten), Schnellstart-Handbuch (7 seiten)
Seite drucken
Installing ONIE
Installing ONIE on ENOS
1. Download an ONIE image for the switch from the following link:
2. Upload the ONIE image to a local server or a USB drive.
3. Connect to the switch using the mini-USB serial console port. For more details, see
4. After connecting to the switch, enter Privileged EXEC configuration mode:
5. Use one of the following commands to copy the ONIE image:
14
Lenovo ONIE Quick Start Guide for G8272
Only after you have successfully installed the appropriate FoD license key, you will
be able to install ONIE on the switch. For more details, see
FoD License Key" on page
To install ONIE on Enterprise NOS, you must upgrade it to version 8.4 or later. After
upgrading the software image, you can proceed to install ONIE on the G8272 by
using the following steps.
Note: The commands used to install ONIE on the switch will not be available until
you install the ONIE license key.
http://support.lenovo.com/
For ENOS, the ONIE image is called Lenovo Rackswitch G8272 [ONIE]
v8.4.x.0.
"Connecting to the G8272" on page
G8272> enable
G8272#
from a FTP, SFTP, or TFTP server:
copy ftp onie-image [data-port|mgt-port]
copy sftp onie-image [data-port|mgt-port]
copy tftp onie-image [data-port|mgt-port]
copy tftp onie-image address <TFTP server address> filename
<file path on TFTP server> [data-port|mgt-port]
from a USB drive:
usbcopy fromusb <file path> onie-image
15.
6.
"Installing the ONIE