Lenovo RackSwitch G8272 Schnellstart-Handbuch - Seite 15
Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Schalter Lenovo RackSwitch G8272 herunter. Lenovo RackSwitch G8272 24 Seiten.
Auch für Lenovo RackSwitch G8272: Produkthandbuch (32 seiten), Schnellstart-Handbuch (7 seiten)
Seite drucken
6. To check if the ONIE image was successfully installed on the switch, use the
following command:
© Copyright Lenovo 2017
Following is an example using the copy tftp onie-image command:
G8272# copy tftp onie-image address 10.72.97.98 filename
/onie-image/G8272-ENOS-8.4.1.0_ONIE.imgs mgt-port
onie image currently contains Software Version 8.4.1.0
New download will replace onie image with file
"G8272-ENOS-8.4.1.0_ONIE.imgs" from SFTP/FTP/TFTP server 10.72.97.98.
Connecting via MGT port.
Confirm download operation (y/n) ? y
Image download started to onie image
File appears valid
Download in progress
......................................................
Download Complete
Valid image detected.
Extracting images... Do *NOT* power cycle the switch.
Writing to flash... This can take up to 90 seconds. Please wait
Processing ONIE: 100% - done
Updating ONIE eeprom with manufacturing fields...
ONIE updated successfully
Onie Sector now contains Software Version 8.4.1.0
G8272# show boot
Current running image version: 8.4.1.0
Currently set to boot software image1, backup config block.
NetBoot: disabled, NetBoot tftp server:
Current boot Openflow protocol version: 1.0
USB Boot: disabled
Currently profile is default, set to boot with default profile next time.
Current FLASH software:
image1: version 8.4.1.0, Mode Stand-alone
image2: empty
boot kernel: version 8.4.1.0
bootloader : version 8.4.1.0
onie image: version 8.4.1.0
Currently scheduled reboot time: none
In the command output, the current ONIE image installed on the switch is
displayed under the Current FLASH software section.
, NetBoot cfgfile:
ONIE on the G8272
15