Lenovo RackSwitch G8272 Manuel de démarrage rapide - Page 15
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Lenovo RackSwitch G8272. Lenovo RackSwitch G8272 24 pages.
Également pour Lenovo RackSwitch G8272 : Manuel du produit (32 pages), Manuel de démarrage rapide (7 pages)
Imprimer la page
6. To check if the ONIE image was successfully installed on the switch, use the
following command:
© Copyright Lenovo 2017
Following is an example using the copy tftp onie-image command:
G8272# copy tftp onie-image address 10.72.97.98 filename
/onie-image/G8272-ENOS-8.4.1.0_ONIE.imgs mgt-port
onie image currently contains Software Version 8.4.1.0
New download will replace onie image with file
"G8272-ENOS-8.4.1.0_ONIE.imgs" from SFTP/FTP/TFTP server 10.72.97.98.
Connecting via MGT port.
Confirm download operation (y/n) ? y
Image download started to onie image
File appears valid
Download in progress
......................................................
Download Complete
Valid image detected.
Extracting images... Do *NOT* power cycle the switch.
Writing to flash... This can take up to 90 seconds. Please wait
Processing ONIE: 100% - done
Updating ONIE eeprom with manufacturing fields...
ONIE updated successfully
Onie Sector now contains Software Version 8.4.1.0
G8272# show boot
Current running image version: 8.4.1.0
Currently set to boot software image1, backup config block.
NetBoot: disabled, NetBoot tftp server:
Current boot Openflow protocol version: 1.0
USB Boot: disabled
Currently profile is default, set to boot with default profile next time.
Current FLASH software:
image1: version 8.4.1.0, Mode Stand-alone
image2: empty
boot kernel: version 8.4.1.0
bootloader : version 8.4.1.0
onie image: version 8.4.1.0
Currently scheduled reboot time: none
In the command output, the current ONIE image installed on the switch is
displayed under the Current FLASH software section.
, NetBoot cfgfile:
ONIE on the G8272
15