Lenovo RackSwitch G8272 Краткое руководство по эксплуатации - Страница 15

Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Переключатель Lenovo RackSwitch G8272. Lenovo RackSwitch G8272 24 страницы.
Также для Lenovo RackSwitch G8272: Руководство по эксплуатации (32 страниц), Краткое руководство по эксплуатации (7 страниц)

6. To check if the ONIE image was successfully installed on the switch, use the

following command:

Following is an example using the copy tftp onie-image command:

G8272# copy tftp onie-image address 10.72.97.98 filename

/onie-image/G8272-ENOS-8.4.1.0_ONIE.imgs mgt-port

onie image currently contains Software Version 8.4.1.0

New download will replace onie image with file

"G8272-ENOS-8.4.1.0_ONIE.imgs" from SFTP/FTP/TFTP server 10.72.97.98.

Connecting via MGT port.

Confirm download operation (y/n) ? y

Image download started to onie image

File appears valid

Download in progress

......................................................

Download Complete

Valid image detected.

Extracting images... Do *NOT* power cycle the switch.

Writing to flash... This can take up to 90 seconds. Please wait

Processing ONIE: 100% - done

Updating ONIE eeprom with manufacturing fields...

ONIE updated successfully

Onie Sector now contains Software Version 8.4.1.0

G8272# show boot

Current running image version: 8.4.1.0

Currently set to boot software image1, backup config block.

NetBoot: disabled, NetBoot tftp server:

Current boot Openflow protocol version: 1.0

USB Boot: disabled

Currently profile is default, set to boot with default profile next time.

Current FLASH software:

image1: version 8.4.1.0, Mode Stand-alone

image2: empty

boot kernel: version 8.4.1.0

bootloader : version 8.4.1.0

onie image: version 8.4.1.0

Currently scheduled reboot time: none

In the command output, the current ONIE image installed on the switch is

displayed under the Current FLASH software section.

, NetBoot cfgfile:

ONIE on the G8272