- ページ 15

スイッチ Lenovo RackSwitch G8272のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Lenovo RackSwitch G8272 24 ページ。
Lenovo RackSwitch G8272 にも：製品マニュアル (32 ページ), クイック・スタート・マニュアル (7 ページ)

ページを印刷する

1. Switch Unit

6. To check if the ONIE image was successfully installed on the switch, use the

following command:

Following is an example using the copy tftp onie-image command:

G8272# copy tftp onie-image address 10.72.97.98 filename

/onie-image/G8272-ENOS-8.4.1.0_ONIE.imgs mgt-port

onie image currently contains Software Version 8.4.1.0

New download will replace onie image with file

"G8272-ENOS-8.4.1.0_ONIE.imgs" from SFTP/FTP/TFTP server 10.72.97.98.

Connecting via MGT port.

Confirm download operation (y/n) ? y

Image download started to onie image

File appears valid

Download in progress

......................................................

Download Complete

Valid image detected.

Extracting images... Do *NOT* power cycle the switch.

Writing to flash... This can take up to 90 seconds. Please wait

Processing ONIE: 100% - done

Updating ONIE eeprom with manufacturing fields...

ONIE updated successfully

Onie Sector now contains Software Version 8.4.1.0

G8272# show boot

Current running image version: 8.4.1.0

Currently set to boot software image1, backup config block.

NetBoot: disabled, NetBoot tftp server:

Current boot Openflow protocol version: 1.0

USB Boot: disabled

Currently profile is default, set to boot with default profile next time.

Current FLASH software:

image1: version 8.4.1.0, Mode Stand-alone

image2: empty

boot kernel: version 8.4.1.0

bootloader : version 8.4.1.0

onie image: version 8.4.1.0

Currently scheduled reboot time: none

In the command output, the current ONIE image installed on the switch is

displayed under the Current FLASH software section.

, NetBoot cfgfile:

ONIE on the G8272