Nikon D200 Benutzerhandbuch - Seite 10

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Kamera-Zubehör Nikon D200 herunter. Nikon D200 19 Seiten. Exploring
Auch für Nikon D200: Broschüre & Specs (13 seiten), Broschüre (7 seiten), Setup-Handbuch (2 seiten), Broschüre & Specs (18 seiten), Broschüre (14 seiten), Spezifikationen (2 seiten), Merkmale und Vergleichstabelle (1 seiten), Spezifikationen (2 seiten), Betriebshandbuch (23 seiten), Schnellstart-Handbuch (2 seiten), Handbuch (25 seiten), Schnellstart-Handbuch (9 seiten)

Hugyfot

Strobe Connections

The Hugyfot strobe connections are integrated in the leakage detector

circuit board. This circuit board runs on a single 3.6 Volt 1/2 AA Lithium

battery. The main parts of this system are described as below.

External strobe connection

Nikonos 5-pin or S6-pin

TTL Converter

Standard setup .

External strobe connection(s) A is (are) connected to D and/or E on leakage detector. Hotshoe B is connected to

C on leakage detector. X is used for ﬁrmware upload.

Setup with TTL converter .

External strobe connection(s) A is (are joined and) connected to D on leakage detector. Connection E on leakage

detector is joined with connection F on TTL converter. Hotshoe B is connected to H on TTL converter. G is power

supply on TTL converter.

In case you run out of batteries, a backup system is provided. TTL control will no longer be available!

Backup for standard setup .

External strobe connection(s) A is (are) connected to J and/or K on backup circuit board. Hotshoe B is connected

to I on backup circuit board.

Backup for setup with TTL converter .

External strobe connection(s) A is (are joined and) connected to J or K on leakage detector. Hotshoe B is con-

nected to I on backup circuit board.

Hugyfot Housing for

Internal camera hotshoe

Nikon or Canon

Backup

Nikon D200

Hugyfot leakage warner with integrated

strobe connections Nikon or Canon

Battery holder for

3.6 V 1/2AA Lithium battery

User manual