Nikon D200 사용자 설명서 - 페이지 10

{카테고리_이름} Nikon D200에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Nikon D200 19 페이지. Exploring
Nikon D200에 대해서도 마찬가지입니다: 브로셔 및 사양 (13 페이지), 브로셔 (7 페이지), 설정 매뉴얼 (2 페이지), 브로셔 및 사양 (18 페이지), 브로셔 (14 페이지), 사양 (2 페이지), 기능 및 비교 차트 (1 페이지), 사양 (2 페이지), 운영 매뉴얼 (23 페이지), 빠른 시작 매뉴얼 (2 페이지), 매뉴얼 (25 페이지), 빠른 시작 매뉴얼 (9 페이지)

Hugyfot

Strobe Connections

The Hugyfot strobe connections are integrated in the leakage detector

circuit board. This circuit board runs on a single 3.6 Volt 1/2 AA Lithium

battery. The main parts of this system are described as below.

External strobe connection

Nikonos 5-pin or S6-pin

TTL Converter

Standard setup .

External strobe connection(s) A is (are) connected to D and/or E on leakage detector. Hotshoe B is connected to

C on leakage detector. X is used for ﬁrmware upload.

Setup with TTL converter .

External strobe connection(s) A is (are joined and) connected to D on leakage detector. Connection E on leakage

detector is joined with connection F on TTL converter. Hotshoe B is connected to H on TTL converter. G is power

supply on TTL converter.

In case you run out of batteries, a backup system is provided. TTL control will no longer be available!

Backup for standard setup .

External strobe connection(s) A is (are) connected to J and/or K on backup circuit board. Hotshoe B is connected

to I on backup circuit board.

Backup for setup with TTL converter .

External strobe connection(s) A is (are joined and) connected to J or K on leakage detector. Hotshoe B is con-

nected to I on backup circuit board.

Hugyfot Housing for

Internal camera hotshoe

Nikon or Canon

Backup

Nikon D200

Hugyfot leakage warner with integrated

strobe connections Nikon or Canon

Battery holder for

3.6 V 1/2AA Lithium battery

User manual