Armstrong 4039 Series Installations- und Betriebsanleitung - Seite 6
Blättern Sie online oder laden Sie pdf Installations- und Betriebsanleitung für Water Pump Armstrong 4039 Series herunter. Armstrong 4039 Series 8 Seiten. Belt driven pumps
CAUTION:
Under no circumstances should the pump be used for flushing out the system. In line with CIBSE
commissioning code W: 1994, the pump should be out of line or bypassed during flushing.
NOTE:
Particular care must be taken to check the following before the pump is put into operation:
a)
Pump primed?
b)
Rotation OK?
c)
Lubrication OK?
d)
Pipework properly supported?
e)
Voltage supply OK?
f)
Overload protection OK?
g)
Is the system clean?
h)
Is the area around the pump clean?
WARRANTY
Does not cover any damages to the equipment resulting from failure to observe the above precautions. Refer to
Armstrong General Terms and Warranty sheet. Contact your local Armstrong representative for full information.
Page 6 of 8