Disc Makers Elite2 Handbuch "Erste Schritte - Seite 5
Blättern Sie online oder laden Sie pdf Handbuch "Erste Schritte für Computer Hardware Disc Makers Elite2 herunter. Disc Makers Elite2 15 Seiten. Elite series
Seite druckenElite2_Getting_Started_04.indd 5
2
Open the latch on the left cartridge holder, labeled 57, by pushing upward on
it.
3
Unwrap the color cartridge, remove the tape from the ink nozzles, and insert the
cartridge into the holder. The cartridge should slide easily into place—you do
not need to force it.
4
Lower the latch and snap it into place to secure the cartridge.
5
Repeat this same procedure for the black cartridge that inserts into the right
cartridge holder.
6
Close the printer cover when both cartridges are securely installed in their hold-
ers. The printer goes through a brief sequence to prepare the cartridges for
printing.
Note: You can test the operation of the printer during the procedure described in
the section titled Operating the duplicator.
Elite 2 Getting Started Guide
2/20/06 4:07:29 PM
5