Disc Makers Elite2 Handbuch "Erste Schritte - Seite 7

Blättern Sie online oder laden Sie pdf Handbuch "Erste Schritte für Computer Hardware Disc Makers Elite2 herunter. Disc Makers Elite2 15 Seiten. Elite series

Seite drucken

Elite2_Getting_Started_04.indd 7

Note: If Windows displays a warning that the drivers have not passed XP certiﬁ ca-

tion, click OK to proceed.

Return to the installation disc and select FlexWare Setup. The startup screen for

the FlexWare installation appears, as shown in the ﬁ gure.

Follow the steps in the FlexWare Setup Wizard to complete the installation of

FlexWare on the host computer.

Remove the Installation and Support disc from the computer disc drive and

restart the computer.

After the computer restarts, make a note of the serial number on the Discus

CD-ROM sleeve (this key is needed to ﬁ nalize the installation). Insert the Discus

CD-ROM into the computer disc drive and select the Install to hard disk option

from the Launcher screen that appears.

At the conclusion of the installation, Discus places an icon on the Windows

desktop. Click this icon and Discus displays an entry dialog box for the serial

number that you noted earlier.

Enter the serial number and click OK to conﬁ rm your entry. Discus starts up and

displays its initial screen. You can run Discus either independently or access it

from within FlexWare (FlexWare automatically locates Discus following installa-

tion and can access it directly from within the application).

Operating the duplicator

To help you get started duplicating discs, this section guides you through the initial

use of FlexWare, setting up a copy operation with a built-in wizard, including the

printing of a disc label. First, place two blank discs on the input spindle. Then,

select a non-copy protected disc to use as a master in this procedure and place it

on top of the blank discs on the input spindle. We recommend using a master disc

with a minimal number of small ﬁ les so that the test will run more quickly.

Elite 2 Getting Started Guide

2/20/06 4:07:30 PM