Discount Car Stereo A2DIY-GM3X Schnellstart-Installationshandbuch - Seite 3
Blättern Sie online oder laden Sie pdf Schnellstart-Installationshandbuch für Car Stereo System Discount Car Stereo A2DIY-GM3X herunter. Discount Car Stereo A2DIY-GM3X 8 Seiten. For gm class ii with xm tuner module
Seite drucken
4. If NOT retaining XM (Expired subscription):
Connect male-to-male cable audio cable (See Fig. 4) to module "AUX"
jack (See Fig. 5)
Fig. 4
3.5mm male to male cable
Fig. 5
Module
5. Secure visor microphone (See Fig. 6) to visor or headliner using
included visor clip (See Fig. 7)
Fig. 6
Microphone
6. Route microphone (See Fig. 6) down pillar, under driver kick panel and
across to radio cavity and connect to module "MIC" jack (See Fig. 5)
Fig. 7
Visor clip
Be cautious not to damage or cut both microphone cable.
7. Connect installation harness
Red wire
vehicle.
Do not use 12V constant supply (battery).
Tip: Accessory (ACC) is available from fuse panel.
Accessory power is active when ignition is in "ACC" or "ON "positions.
8. Connect installation harness Black wire ring terminal to radio chassis
by removing chassis screw and secure ring terminal or ground to
alternate location.
to 12V Accessory supply in