Discount Car Stereo A2DIY-GM3X 빠른 시작 설치 매뉴얼 - 페이지 3
{카테고리_이름} Discount Car Stereo A2DIY-GM3X에 대한 빠른 시작 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Discount Car Stereo A2DIY-GM3X 8 페이지. For gm class ii with xm tuner module
페이지 인쇄
4. If NOT retaining XM (Expired subscription):
Connect male-to-male cable audio cable (See Fig. 4) to module "AUX"
jack (See Fig. 5)
Fig. 4
3.5mm male to male cable
Fig. 5
Module
5. Secure visor microphone (See Fig. 6) to visor or headliner using
included visor clip (See Fig. 7)
Fig. 6
Microphone
6. Route microphone (See Fig. 6) down pillar, under driver kick panel and
across to radio cavity and connect to module "MIC" jack (See Fig. 5)
Fig. 7
Visor clip
Be cautious not to damage or cut both microphone cable.
7. Connect installation harness
Red wire
vehicle.
Do not use 12V constant supply (battery).
Tip: Accessory (ACC) is available from fuse panel.
Accessory power is active when ignition is in "ACC" or "ON "positions.
8. Connect installation harness Black wire ring terminal to radio chassis
by removing chassis screw and secure ring terminal or ground to
alternate location.
to 12V Accessory supply in