ABBAKA Range Hood Installationsanleitung Handbuch - Seite 5

Blättern Sie online oder laden Sie pdf Installationsanleitung Handbuch für Lüftungshaube ABBAKA Range Hood herunter. ABBAKA Range Hood 12 Seiten.

Seite drucken

Proper ductwork installation will al-

low ventilator to efficiently move air from

hood to outside the building. Use smooth

galvanized ductwork with a minimum num-

ber of elbows and bends. All joints must be

sealed and run upstream. Ceiling ductwork

should "stub down", cut to length, to mate

with backdraft damper of installed liner (see

illustration).

Ductwork is not provided with hood.

NOTE: It is recommended to have the

range hood on site before determining the

terminal position of the duct 'stub'. Before

measuring, attach backdraft damper to ex-

haust outlet.

NOTES

1. In cold climates, insulate the ductwork

in cold spaces to prevent moisture con-

densation in the winter, which can run

down the ductwork, into the hood be-

low. A thermal break may be required.

2. No screening material on the wall cap

or roof jack. Screens cut airflow by

20%- 50% and should not be used. If a

rodent, or small animal barrier is re-

quired, screen openings should be 1" x

1" minimum.

3. The opening on the wall cap or roof

jack should be wide enough and deep

enough to accept the proper sized duct

and allow the air to flow continuously

and freely. Wall caps and roof jacks

should have a solid, gravity damper

that opens and closes freely with the air

flow.

Ducting

Abbaka Internal Ventilator - Roof Venting

Roof

Ceiling

Duct 'Stub'

From Ceiling

Backdraft

Damper

Internal Ventilator

Use proper size round ducting.

600 CFM requires 8" (50 sq. in.)

1200 CFM requires 10" (78 sq. in.)

Wall Hood

(stack against wall)

Wall Side

Duct Location

Roof Jack

Hood Shell

Liner

Duct Positioning

Top View

Wall Hood

(stack centered)

[Luna & Quantum models]

Wall Side

Duct Location

Duct Centered

Island Hood

Duct Location

Duct Centered

Exhaust Outlet