BLADEZ E-LITE 250 Produkt-Handbuch - Seite 12

Blättern Sie online oder laden Sie pdf Produkt-Handbuch für Scooter BLADEZ E-LITE 250 herunter. BLADEZ E-LITE 250 17 Seiten. Electric power board

To Inflate the Tires

Tire wear will differ based on rider weight, riding conditions and care. Replacement tires

can be obtained at your local Bladez dealer, through motorcycle shops, or from the

Bladez website at www.ebladez.com. The Bladez E-Lite uses a standard Kenda 7.5"

(2.00 x 50) pneumatic tire.

Tire Pressure

The tire must be inflated to a maximum of 50 P.S.I.. It is also recommended to use a

tube additive like Slime purchasable from any motorcycle shop, to avoid inconvenient

punctures.

CHAIN CARE

Proper chain care will increase the life and improve performance of your Power Board.

Always keep the chain lubricated and tightened to proper tension.

Lubrication

Always keep the chains lubricated with a good chain spray or grease (not chain wax). If

the chain is allowed to run dry for a prolonged period of time it will fail, and the life of the

chain is severely shortened.

Chain Adjustment

The chain on the E-Lite should be adjusted from time to time. The chain should be tight

enough not to skip, but have a little bit of play. If you feel your chain skipping or make a

popping noise, adjust the tension immediately.

1. Remove the valve stem cover and expose

the valve stem (Fig. 8).

2. Using a standard bicycle pump, inflate the

tires to 50 PSI and replace the valve stem

cover.

The Bladez E-Lite uses an identical rim and

tires assembly on the front and rear wheels,

which means that the tires can be rotated.

The wheels are actually two wheel halves

(split rim) bolted together to make it easier

to remove and replace the tire. Empty all

air from the tire, prior to loosing the bolts to

split the rim.

Page 12