3D AEROWORKS Pilatus PC-21 Montageanleitung und Benutzerhandbuch - Seite 14
Blättern Sie online oder laden Sie pdf Montageanleitung und Benutzerhandbuch für Spielzeug 3D AEROWORKS Pilatus PC-21 herunter. 3D AEROWORKS Pilatus PC-21 19 Seiten.
Seite drucken
20
Install the motor to the motor mount. The motor mount holes may need to be pre-drilled with
a 3mm drill bit.
21
Fit the propeller hub to the motor and screw in the blades using m2 x 10mm screws. Then
secure the spinner to the hub. The propeller blades will need to be pre-drilled with a 2mm
drill bit for ease of fitment.
Installing the propeller:
-
Install the blade to the hub and secure it with an m2 x 10mm screw. (screw direction
towards the back of the hub)
-
Install the hub to the motor.
-
Secure with either metal nut provided or printed nut.
-
Install the spinner. The spinner is designed with an m5 thread to suit most small
motors with a regular cw thread.