3D AEROWORKS Pilatus PC-21 조립 설명서 및 사용자 설명서 - 페이지 14

{카테고리_이름} 3D AEROWORKS Pilatus PC-21에 대한 조립 설명서 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 3D AEROWORKS Pilatus PC-21 19 페이지.

Install the motor to the motor mount. The motor mount holes may need to be pre-drilled with

a 3mm drill bit.

Fit the propeller hub to the motor and screw in the blades using m2 x 10mm screws. Then

secure the spinner to the hub. The propeller blades will need to be pre-drilled with a 2mm

drill bit for ease of fitment.

Installing the propeller:

Install the blade to the hub and secure it with an m2 x 10mm screw. (screw direction

towards the back of the hub)

Install the hub to the motor.

Secure with either metal nut provided or printed nut.

Install the spinner. The spinner is designed with an m5 thread to suit most small

motors with a regular cw thread.