Arnott P-2210 Installationshandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Installationshandbuch für Luftkompressor Arnott P-2210 herunter. Arnott P-2210 6 Seiten. Air suspension compressor for 1993-1998 lincoln mark viii (8)

Seite drucken

14.

Remove vapor canister retaining bolt. Partially lower fuel vapor canister and disconnect fuel vapor hose

and fuel vapor canister purge regulator valve from fuel vapor canister (FIGURE C)

15.

Disconnect electrical connector for compressor motor (located on front face of compressor bracket).

(FIGURES D, E FOR STEPS 15-24)

17.

Disconnect solid-state relay connector (located on outboard face of compressor bracket).

NOTE:

TO RELEASE AIR TUBE(S) YOU MUST PRESS DOWN ON TWO SIDES OF THE

QUICK RELEASE FITTING AND PULL OUT AIR TUBE(S).

18.

Disconnect four (4) air lines from compressor air dryer.

19.

Disconnect wiring harness and front left air line clip from rear face of compressor.

20.

Remove two (2) lower screws retaining bracket to body.

21.

Remove upper screw retaining top of compressor bracket to body.

22.

Remove air compressor.

23.

Detach air intake hose from top of compressor head.

P-2210

P-

ARNOTT AIR SUSPENSION COMPRESSOR

1993-1998

FOR

LINCOLN MARK VIII (8)

FIGURE C

2210

REV 3

04/16/2015