Arnott P-2210 설치 매뉴얼 - 페이지 4

{카테고리_이름} Arnott P-2210에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Arnott P-2210 6 페이지. Air suspension compressor for 1993-1998 lincoln mark viii (8)

14.

Remove vapor canister retaining bolt. Partially lower fuel vapor canister and disconnect fuel vapor hose

and fuel vapor canister purge regulator valve from fuel vapor canister (FIGURE C)

15.

Disconnect electrical connector for compressor motor (located on front face of compressor bracket).

(FIGURES D, E FOR STEPS 15-24)

17.

Disconnect solid-state relay connector (located on outboard face of compressor bracket).

NOTE:

TO RELEASE AIR TUBE(S) YOU MUST PRESS DOWN ON TWO SIDES OF THE

QUICK RELEASE FITTING AND PULL OUT AIR TUBE(S).

18.

Disconnect four (4) air lines from compressor air dryer.

19.

Disconnect wiring harness and front left air line clip from rear face of compressor.

20.

Remove two (2) lower screws retaining bracket to body.

21.

Remove upper screw retaining top of compressor bracket to body.

22.

Remove air compressor.

23.

Detach air intake hose from top of compressor head.

P-2210

P-

ARNOTT AIR SUSPENSION COMPRESSOR

1993-1998

FOR

LINCOLN MARK VIII (8)

FIGURE C

2210

REV 3

04/16/2015