3D Hobby Shop ASPERA ARF 46 Montageanleitung - Seite 3
Blättern Sie online oder laden Sie pdf Montageanleitung für Spielzeug 3D Hobby Shop ASPERA ARF 46 herunter. 3D Hobby Shop ASPERA ARF 46 17 Seiten. Radio controlled aircraft
Seite drucken3
WING ASSEMBLY
The ailerons hinge onto the wings using 4 hinges each. The hinges are already installed into the wings,
but need to be glued with THIN CA glue. Check the fit of the aileron to be sure the color stripes line up on
the wing, and flex the aileron to be sure that it moves freely and hinges flex easily. Drip two large drops
of THIN CA glue into the aileron hinge joint right on top of each hinge. The THIN CA glue will wick into
the hinge slots and penetrate the wood, forming a strong hinge joint. Use two large drops per hinge, no
less.
Turn the wing over, and locate the aileron servo mount on the bottom of the wing. Use a hobby knife to
remove the covering over the servo mount hole.
Remove the covering over the slot in the aileron as shown. The aileron control horns are different from
the rudder/elevator control horns, see picture.