3D Hobby Shop ASPERA ARF 46 Assembly Manual - Page 3

Browse online or download pdf Assembly Manual for Toy 3D Hobby Shop ASPERA ARF 46. 3D Hobby Shop ASPERA ARF 46 17 pages. Radio controlled aircraft

Print Page

WING ASSEMBLY

The ailerons hinge onto the wings using 4 hinges each. The hinges are already installed into the wings,

but need to be glued with THIN CA glue. Check the fit of the aileron to be sure the color stripes line up on

the wing, and flex the aileron to be sure that it moves freely and hinges flex easily. Drip two large drops

of THIN CA glue into the aileron hinge joint right on top of each hinge. The THIN CA glue will wick into

the hinge slots and penetrate the wood, forming a strong hinge joint. Use two large drops per hinge, no

less.

Turn the wing over, and locate the aileron servo mount on the bottom of the wing. Use a hobby knife to

remove the covering over the servo mount hole.

Remove the covering over the slot in the aileron as shown. The aileron control horns are different from

the rudder/elevator control horns, see picture.