3D Hobby Shop ASPERA ARF 46 Montageanleitung - Seite 7

Blättern Sie online oder laden Sie pdf Montageanleitung für Spielzeug 3D Hobby Shop ASPERA ARF 46 herunter. 3D Hobby Shop ASPERA ARF 46 17 Seiten. Radio controlled aircraft

Seite drucken

When you are satisfied with the alignment of the stab, turn the fuselage over and drip thin CA glue into

the joint between the fuselage and stabilizer. It is not necessary to remove any covering on this joint.

Allow to dry.

Check for free motion of the elevator up and down, and apply a few drops of thin CA to each elevator

hinge.

Install vertical fin into fuselage with medium or thick CA glue.