3D Hobby Shop ASPERA ARF 46 Manuel d'assemblage - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel d'assemblage pour {nom_de_la_catégorie} 3D Hobby Shop ASPERA ARF 46. 3D Hobby Shop ASPERA ARF 46 17 pages. Radio controlled aircraft
Imprimer la page7
When you are satisfied with the alignment of the stab, turn the fuselage over and drip thin CA glue into
the joint between the fuselage and stabilizer. It is not necessary to remove any covering on this joint.
Allow to dry.
Check for free motion of the elevator up and down, and apply a few drops of thin CA to each elevator
hinge.
Install vertical fin into fuselage with medium or thick CA glue.