3D Hobby Shop ASPERA ARF 46 Manuel d'assemblage - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'assemblage pour {nom_de_la_catégorie} 3D Hobby Shop ASPERA ARF 46. 3D Hobby Shop ASPERA ARF 46 17 pages. Radio controlled aircraft

Imprimer la page

Plug your extension into your aileron servo. Secure with tape around the plug.

Use the string installed inside the wing to pull your aileron servo lead through the interior of the wing.

Install servo into the wing using two servo-mounting screws with the servo output arm toward the front of

the airplane.

Repeat all of these steps for the other wing.

TAIL ASSEMBLY

Check horizontal stabilizer and elevator assembly for warps. Use a covering iron as necessary to remove

any warpage. Be careful! It doesn't take much heat to do this job!

Remove covering over the slot in the fuselage for the horizontal stabilizer as shown.