3D Hobby Shop ASPERA ARF 46 Montaj Kılavuzu - Sayfa 5
Oyuncak 3D Hobby Shop ASPERA ARF 46 için çevrimiçi göz atın veya pdf Montaj Kılavuzu indirin. 3D Hobby Shop ASPERA ARF 46 17 sayfaları. Radio controlled aircraft
Sayfayı Yazdır5
Plug your extension into your aileron servo. Secure with tape around the plug.
Use the string installed inside the wing to pull your aileron servo lead through the interior of the wing.
Install servo into the wing using two servo-mounting screws with the servo output arm toward the front of
the airplane.
Repeat all of these steps for the other wing.
TAIL ASSEMBLY
Check horizontal stabilizer and elevator assembly for warps. Use a covering iron as necessary to remove
any warpage. Be careful! It doesn't take much heat to do this job!
Remove covering over the slot in the fuselage for the horizontal stabilizer as shown.