AROEVE MK04 Benutzerhandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Luftreiniger AROEVE MK04 herunter. AROEVE MK04 11 Seiten.

Mode Button

Display off /Filter Reset Button

1. Turn ON/OFF

● Tap "

" to turn on the puriﬁer. The fan will start on Level 1 with the indicator

light on.

● The Dust sensor starts to work.Upon start up,the unit may take a few minutes to

calibrate and measure the air quality. During this time,the Air Quality Indicator will

pulse between blue, yellow, and red until the air quality is determined. When the

appropriate reading is determined, the indicator will then remain a solid color.

● Tap "

" again to turn off the puriﬁer.

NOTE:

Your air puriﬁer is equipped with Dust Sensors that detect the level of PMs in the

room and provide a visual display to indicate air quality. The Air Quality Indicator

Ring is located around the Control Panel.The Sensor is constantly monitoring the air

and the Air Quality Indicator will illuminate either blue, yellow, or red depending on

the level of PMs detected in the room:

BLUE - Good air quality

Yellow - Moderate air quality

Red - Poor air quality

2. Modes Switch

Tap "

" to change fan speed between 1, 2 and Auto.

Auto Mode: When the Auto mode is activated, the air puriﬁer will adjust the fan speed

automatically based on air quality. For example, if the air quality is bad, the fan will

automatically be set to high speed.

Light Button

ON/OFF Button

Timer Button

Sleep Mode

Button