AROEVE MK04 Посібник користувача - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник користувача для Очищувач повітря AROEVE MK04. AROEVE MK04 11 сторінок.
Друкувати сторінку
Mode Button
Display off /Filter Reset Button
1. Turn ON/OFF
● Tap "
" to turn on the purifier. The fan will start on Level 1 with the indicator
light on.
● The Dust sensor starts to work.Upon start up,the unit may take a few minutes to
calibrate and measure the air quality. During this time,the Air Quality Indicator will
pulse between blue, yellow, and red until the air quality is determined. When the
appropriate reading is determined, the indicator will then remain a solid color.
● Tap "
" again to turn off the purifier.
NOTE:
Your air purifier is equipped with Dust Sensors that detect the level of PMs in the
room and provide a visual display to indicate air quality. The Air Quality Indicator
Ring is located around the Control Panel.The Sensor is constantly monitoring the air
and the Air Quality Indicator will illuminate either blue, yellow, or red depending on
the level of PMs detected in the room:
BLUE - Good air quality
Yellow - Moderate air quality
Red - Poor air quality
2. Modes Switch
Tap "
" to change fan speed between 1, 2 and Auto.
Auto Mode: When the Auto mode is activated, the air purifier will adjust the fan speed
automatically based on air quality. For example, if the air quality is bad, the fan will
automatically be set to high speed.
Light Button
ON/OFF Button
5
Timer Button
Sleep Mode
Button