3D Hobby Shop 59" AJ Slick Installationshandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Installationshandbuch für Flugzeuge 3D Hobby Shop 59" AJ Slick herunter. 3D Hobby Shop 59" AJ Slick 20 Seiten.

Install the wheel/axle into the wheel pant as shown. The fit is intentionally tight, and you

will have to flex the lip of the pant opening to make enough room for the axle to slip inside.

Iinstall the wheel assembly on the landing gear leg. Tighten the locknut as shown to secure the assembly

onto the gear leg. Repeat for other side. NOTE: A special small wrench is included to hold the axle

while it is being tightened.

Attach the gear to the fuselage with 3mm screws, use loctite. NOTE: Check the fit of the screws. Do not

allow the screws to contact the carbon tubes inside the fuselage. If they do, use one or two of the

included washers as spacers between the head of the screws and the landing gear.