3D Hobby Shop 59" AJ Slick Installationshandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Installationshandbuch für Flugzeuge 3D Hobby Shop 59" AJ Slick herunter. 3D Hobby Shop 59" AJ Slick 20 Seiten.

Install gear cover plate as shown, with clear tape or thick CA.

Remove covering over horizontal stabilizer slot on both sides of fuselage as shown. Remove covering

over elevator servo opening on LEFT side of the fuselage as shown. You can use a sharp hobby knife or

a soldering iron with a sharp tip. HOWEVER – If you do not have experience using a hot tool to remove

covering, BE CAREFUL. It is very easy to melt the covering too much at the edges, giving a bad

appearance. If you use a hobby knife, make sure it has a fresh, sharp blade.