3D Hobby Shop 59" AJ Slick Installatiehandleiding - Pagina 5

Blader online of download pdf Installatiehandleiding voor {categorie_naam} 3D Hobby Shop 59" AJ Slick. 3D Hobby Shop 59" AJ Slick 20 pagina's.

Install gear cover plate as shown, with clear tape or thick CA.

Remove covering over horizontal stabilizer slot on both sides of fuselage as shown. Remove covering

over elevator servo opening on LEFT side of the fuselage as shown. You can use a sharp hobby knife or

a soldering iron with a sharp tip. HOWEVER – If you do not have experience using a hot tool to remove

covering, BE CAREFUL. It is very easy to melt the covering too much at the edges, giving a bad

appearance. If you use a hobby knife, make sure it has a fresh, sharp blade.