AERF EP30 Gebrauchsanweisung - Seite 3
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Fernsteuerung AERF EP30 herunter. AERF EP30 3 Seiten.
Seite druckenCHANNEL (channels will react to automatic operation)
Each channel can be enabled or disabled to respond to the automatic operation. Press the
channels. When the symbol
until you reach the desired. Press
if is enabled. Once enabled or disabled all desired channels Press the
GENERAL (general channels will react to automatic operation)
Each channel can usually be enabled or disabled to respond to the automatic operation. Press the
channels. Symbol
reach the desired general. Press
"ON" appears if is enabled. Once enabled all channels or disabled all general selected channels press
programming button PROG. (back side of the control) to exit to the main menu and thus end the program process.
TECHNICAL SPECIFICATIONS
Power supply
Working temperature
Dimensions
Channels
Groups
Daily programs
Rolling Code
Frequency
CE DECLARATION OF CONFORMITY
Aplicaciones electrónicas y de Radiofrecuencia S.L Pol. Sot dels Pradals C/ Sot dels pradals, 4
08500 Vic (Barcelona) B61840732 DECLARES, under her own responsibility that product It is
designed and manufactured in accordance with the directives LV 2006/95/CE of Low Voltage, EMC
2004/108/CE of Electromagnetic Compatibility , 2006/42/CE Machines directive and is designed to
control doors in accordance with standard EN13241-1 (2004) and complies with the requirements
of the R&TTE 99/05/CE European parliament directive of March 9th 1999. This directive was
transposed to the Spanish legislation by means of Real Decree 1890/2000 in November 20th of
2000, directive 1999/5/CE spectrum radio electric protection, electromagnetic compatibility
directive 2004/108/CE. For more information visit the website www.aerf.eu
EP30
appears to indicate that you can change the channel status. Press the keys
to change the channel status. "OFF" appears indicating that the channel is disabled. "On" appears
appears to indicate that you can change the channel. Press the keys
to change the overall channel state. "OFF" appears indicating that the overall channel is disabled.
2 battery 3V CR 2032 type
0ºC to + 50ºC
42 x 135 x 18 mm.
30
8
6
Yes
433,92 Mhz
button to go the next level.
WARNING!!
- Equipment installation and start-up, can only be executed
by qualified personal.
button to change status of desired
to move the channels
button to change the general
to move the channels until you
to pass the next level. Press
3 - 3