Dish TV S9000 Betriebshandbuch - Seite 10

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Empfänger Dish TV S9000 herunter. Dish TV S9000 20 Seiten. Digital satellite receiver

INSTALLATION

Press the MENU key on non-menu mode and the image

shows as

Press the

[red key]

repeatedly to alternate the type of language

Move the cursor to the Installation menu tape and press the

OK key, the image shows as

Antenna Setting

H ighlight the instrcution [LNB Index(1..8)], press the </> key to

opt one correct type, or, further,

Light the LNB Freq Type to select one suitable preinstalled

parameter (C Band, Single Sol., Ku Band, Universal)

or, pitch on the User Defined to install the LNB Freq Low

and LNB Freq High parameters according to the value of

tuner on the antenna by forcing down the digit-keys. Press the OK key to display the Warning dialog box to

save or cancel the parameter installation by choosing the YES or NO instruction.

E.g, provided that there have parameter of [local oscillation] indicating as 5.15GHz, then you should set the

[LNB Freq Type] as [C Band, LNB Freq Low 5150& LNB Freq High5150]; provided that the indicating parameter

is 10.75GHz, then you should set the [LNB Freq Type] as [Ku Band, LNB Freq Low 10750& LNB Freq

High10750]

Light the DiSEqC tape to opt the suitable port (port1, port2, port3, port4, Motor, None) through pressing the </>

key. The port must be same to the actual satellite signal inputting terminal

Attention:

LNB Power: Single mode: keep the status on "on"

Loop situation: keep the status of the machine which

connected the satellite signal on the "on" and others on the

"off"

Press the EXIT key to return to the FAST SCAN interface.

After setting the LNB parameter, move the cursor onto the

instruction [Start Scan], press the key [OK] to commence the

process of scanning. After the process, the machine will save

all the scanned channel and return the interface to the

program-watching's