Dish TV S9000 Betriebshandbuch - Seite 11

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Empfänger Dish TV S9000 herunter. Dish TV S9000 20 Seiten. Digital satellite receiver

Channel Scan: light the second tape [Channel Scan], press the key [OK] to enter

Light the first instruction [Satellite], press the </> key to choose one the satellite or press the OK key to display

the satellite bar to pick. If the type of the DiSEqC in the ANTENNA SETTING is set on motor, then the instruction

[Motor Position] owns the selectivity. Press the </> key to set

=>E: to drive the dish eastwards

=>W: to drive the dish westwards

light the Scan Type, In which: ALL, FTA, Scrambled: ALL: to scan all the channels in the selecting satellite; FTA:

to scan the channels, which belong to the [Free To Air]; Scrambled: to scan the scrambled channel

NIT Search: to scan the channels, which are, belong to the network

Light the Scan Mode: Sat: to scan the channels in the selecting satellite; TP: to scan the channels on the present

TP; Manual: to scan the channel by operator

Finish all the above operation; it is time to scan the channels,

if the scan is rescan on Sat, there will appear a

"warning" dialog box: YES, to rescan; NO, to cancel

The scanning interface shows us as next page

Finish scanning, if the channel has been stored then the

interface returns to the program-watching's

SMATV SCAN

Enter SMATV Setting submenu, the image shows as:

SMATV refers that several users share the same antenna.

Connect the machine to the SMATV network and input the

symbol rate of the transponder. Move the cursor to the fifth

strip and press OK key to start the scanning.

EDIT SATELLITE

Light the Edit Satellite tape and force down the OK key to

enter (image, next page)

red

Del: Press the

key, the dialog box with "warning"

display, force down the "Yes" instruction to delete and

the "No" to abandon