Aerial AD 420 Gebrauchsanweisung - Seite 10

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Luftentfeuchter Aerial AD 420 herunter. Aerial AD 420 16 Seiten.

Aerial AD 420 Gebrauchsanweisung
6.5 Condensate removal
The dehumidifiers AD 420 / 430 are provided with water collecting bucket
(AD 420 = 8,3 ltr / AD 430 = 12,0 ltr) and connection for hose 12 mm.
The water bucket is in the device on a balance. The balance is activated by the
weight of the full bucket and the device is switched off. Switch off the unit at the
on/off-switch and empty the bucket. After the bucket is placed in the device again,
turn on the device at the on-/off-switch.
A connection outlet 12 mm is placed above the bucket. Remove the bucket
provided that you would like to guide the condensate directly into a drain. Attach a
hose 12 mm to the drain and fix this with a hose clamp. Proceed cautiously in order
not to burst the drain from the condensate tub.
Guide the hose with slope of the device into the drain away (at least 5 cm slope per
meters).
If the dryer is placed on a wall bracket or otherwise increased, the drain hose can
be led by the opening in the balance downward.
ATTENTION:
Make sure that the condensate can always be handled safely.
6.6 Condensate pump (optional extra)
Optionally for AD 420 / 430 a pump-out-kit is deliverable. You receive the "pump-
out-kit" from your AERIAL-dealer.
The pump out kit can be installed with few handles completely simply and removed
again when desired.
Pump-out-Kit for AD 420 / 430
(a) hose connector
for hose 12 x 2 mm
page 10 of 16
(b) Twist-off for the
adjustment of the
pump-out-kit in the
bucket area.
Turn for removing =
turn twist-off left, in
horizontal position.
Turn for fixing =
Turn twist-off right, in
vertical position
(c) switch for manual
pump out (before
moving the unit)