3D Systems ProJet 4500 Handbuch Nachbearbeitung - Seite 12
Blättern Sie online oder laden Sie pdf Handbuch Nachbearbeitung für 3D-Drucker 3D Systems ProJet 4500 herunter. 3D Systems ProJet 4500 13 Seiten. 3d professional printer
Auch für 3D Systems ProJet 4500: Kurzreferenz-Handbuch (19 seiten)
Seite drucken
5 .
There may be drops of liquid wax clinging to the bottom surfaces of the part . Dab these off with a paper towel . If any undesired visible
wax remains on the part use the paper towel to get as much off . If a paper towel doesn't work use a scraper (for large surfaces) or a
pic (for tight areas) to remove the extra wax . If more than a paper towel is used, you may want to place the part back in the oven for
approximately 5-10 min to allow the wax smooth out along the surface .
Remove any leftover wax . Place the part back in oven for 5-10 minutes .
Left – Standard cleaning; Middle – IPA dipped; Right – Wax Dipped
12
3D Systems, Inc.