Displays2go PEDLEDWH Montageanleitung - Seite 3

Blättern Sie online oder laden Sie pdf Montageanleitung für Racks & Ständer Displays2go PEDLEDWH herunter. Displays2go PEDLEDWH 4 Seiten.

1. Separate each standoff cap from its base. Use enclosed hardware and a screw

driver (not included) to secure all 4 standoff bases to the bottom of the pedestal body.

2. Attach the Base plate to fixed standoffs and align each hole with corresponding

standoff barrel. Insert standoff caps through holes and tighten by hand.

3. Move the pedestal body to its standing position. Place the Acrylic plate on top of the

pedestal body, make sure it sits inside the pedestal.