Displays2go PEDLEDWH Petunjuk Perakitan - Halaman 3
Jelajahi secara online atau unduh pdf Petunjuk Perakitan untuk Rak dan Dudukan Displays2go PEDLEDWH. Displays2go PEDLEDWH 4 halaman.
Halaman Cetak
1
2
1. Separate each standoff cap from its base. Use enclosed hardware and a screw
driver (not included) to secure all 4 standoff bases to the bottom of the pedestal body.
2. Attach the Base plate to fixed standoffs and align each hole with corresponding
standoff barrel. Insert standoff caps through holes and tighten by hand.
3
3. Move the pedestal body to its standing position. Place the Acrylic plate on top of the
pedestal body, make sure it sits inside the pedestal.
3