Displays2go QSCT1117WD Montageanleitung - Seite 3
Blättern Sie online oder laden Sie pdf Montageanleitung für Racks & Ständer Displays2go QSCT1117WD herunter. Displays2go QSCT1117WD 4 Seiten. Snap frame poster holder
Seite drucken
1. Insert screws into holes on the base plate of the unit, then affix it to the square pole. Repeat
for both square poles. (This will require an Allen wrench.)
2. Tighten both screws securely, using an Allen wrench (not included).
3. Insert knob screw through the hole (shown at right) on the poster frame. Slip the
3
washer onto the screw. Repeat for both sides of the frame.