Displays2go QSCT1117WD Petunjuk Perakitan - Halaman 3
Jelajahi secara online atau unduh pdf Petunjuk Perakitan untuk Rak dan Dudukan Displays2go QSCT1117WD. Displays2go QSCT1117WD 4 halaman. Snap frame poster holder
Halaman Cetak
1. Insert screws into holes on the base plate of the unit, then affix it to the square pole. Repeat
for both square poles. (This will require an Allen wrench.)
2. Tighten both screws securely, using an Allen wrench (not included).
3. Insert knob screw through the hole (shown at right) on the poster frame. Slip the
3
washer onto the screw. Repeat for both sides of the frame.