3D Systems Touch Benutzerhandbuch - Seite 7
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Zubehör 3D Systems Touch herunter. 3D Systems Touch 19 Seiten. 3d stylus hands on design
Auch für 3D Systems Touch: Benutzerhandbuch (17 seiten)
Seite drucken
CONNECT THE TOUCH
1.
By grabbing the body of the device with both hands, carefully remove the
2.
Position the Touch device in your workspace, using both hands to grasp the body or base of the device.
NOTE: See
"Handling the Touch Device" on page 12
damage.
3.
First, plug the
power cord
power cord
4.
Plug the
into an available
status light on the power supply indicates that it is working correctly.
3D Systems, Inc.
for instructions on how to handle the device to reduce the risk of
into the
power
supply.
outlet
(for 110V the outlet must be rated for at least 2 Amps, for 220V: 1 Amp). The green
Touch
and
cables
7
from the box.