3D Upfitters External Ventilation Kit Installationshandbuch - Seite 6
Blättern Sie online oder laden Sie pdf Installationshandbuch für 3D-Drucker 3D Upfitters External Ventilation Kit herunter. 3D Upfitters External Ventilation Kit 12 Seiten. Air filter & vents
Seite druckenWhen inserting the hex nuts be sure to center the nuts in the middle of the holes so that they
will align with the screws. You can use a needle nose pliers or even a pen tip to adjust the
location.
Aligned
Correctly
Off Center
The adapter is then connected to the fan/filter combination using 40mm M4 screws.
Insert all 4 screws only a small way in before attempting to tighten.
Copyright 2022 3D Upfitters LLC
Aligned
Correctly
Off Center
6