3D Upfitters External Ventilation Kit Installation Manual - Page 6

Browse online or download pdf Installation Manual for 3D Printers 3D Upfitters External Ventilation Kit. 3D Upfitters External Ventilation Kit 12 pages. Air filter & vents

Print Page
When inserting the hex nuts be sure to center the nuts in the middle of the holes so that they
will align with the screws. You can use a needle nose pliers or even a pen tip to adjust the
location.
Aligned
Correctly
Off Center
The adapter is then connected to the fan/filter combination using 40mm M4 screws.
Insert all 4 screws only a small way in before attempting to tighten.
Copyright 2022 3D Upfitters LLC
Aligned
Correctly
Off Center
6