3d-printz Naughty 2000 Anleitung Handbuch - Seite 8

Blättern Sie online oder laden Sie pdf Anleitung Handbuch für Spielzeug 3d-printz Naughty 2000 herunter. 3d-printz Naughty 2000 9 Seiten.

Naughty is made for servos in the 12mm class. These fit perfect:

Savöx SH-0264MG

SG 90

or similar. You´ll ned 6 pcs. If you want to modify the servofittings to your

needs in the CAD you can use the Stepfiles that come with the Download.

batterysuggestion:

3S Lipo, 2200mah, 25C

Motor:

HK NTM 2836

(available in different KV)

...or similar

ESC: ESC with BEC, 40-50 A

Prop: please choose a foldingprop corresponding to your motor/esc combo!

throws

Using the suggested CG of 55mm behind leading edge following throws are a good

starting point:

Aileron: +/- 20mm

Elevator: +/- 10mm

Rudder: Maximum

Camber (Thermal): -3mm

Speed: +2mm

Butterfly/Crow:

Flaps -30mm

Ailerons +25mm

Elevator -2mm

Please try the Crowmode at sufficient height before you use it to land your

Naughty!

The right center of gravity is essential for comfortable flight behavior. This is

precisely why it should be dialled in individually. The initial value can be assumed

to be approx. 55 mm behind the leading edge. If more power and more agile flight

behavior is desired, the center of gravity can be shifted further back, but the

throws should then also be adjusted.