3dEPP EPP Yak 55 Montageanleitung - Seite 7

Blättern Sie online oder laden Sie pdf Montageanleitung für Spielzeug 3dEPP EPP Yak 55 herunter. 3dEPP EPP Yak 55 19 Seiten.

Seite drucken
16. Glue aileron servo with horn located towards the rear of aircraft. Glue servo in place
with hot glue a small amount on the mounting tabs of the servo case is sufficient.
17. Next locate the 10mm motor mount supplied with the kit. Lightly sand the surface of
the motor mount to insure a good bond between the motor mount and the foam. Test
fit the mount before gluing in position. Place a small amount of glue on each of the four
sides of the motor mount and spread evenly along the mount. Carefully but quickly
slide the mount into place making sure the screw is located on the bottom side. Make
sure the upper and lower fuselage and the forward horizontal motor mount foam are
aligned with the plastic motor mount.
7